Appendix: Sample Configurations A-251Eth 1: 212.199.43.41Eth 1: 212.199.43.5610235V Switch 1 V Switch 2Fibre ChannelConnectionEth 1: 212.199.43.422CloudIP address:212.199.43.40Eth 1: 212.199.43.75Disk 1 Disk 2Disk 4Disk 32 21Initiator Target:212.199.43.56EthernetLAN BInitiator Targets:212.199.43.75212.199.43.56Tower boxHost 2IP address:212.199.43.70Tower boxHost 1IP address:212.199.43.50TelnetStationJBOD 1Figure A-15. Cluster TopologySTEP 1. ATTACH CABLESAttach an HSSDC-DB9 fibre channel cable from your JBOD appliance to oneof the storage ports on the back panel of V-Switch 1. See #1 in FigureA-15. Depending on your appliance, you need to plug a terminator into oneof the JBOD ports.Attach an RJ45 copper 1 Gbit Ethernet cable from the Ethernet port Eth1on the front panel of V-Switch 1 to your Telnet terminal. See #2 in FigureA-15. Attach another RJ45 copper 1 Gbit Ethernet cable from the Ethernetport Eth1 on the front panel of the second V-Switch, Vswitch2, to yourTelnet terminal.
