Chapter 4: V-Switch Configuration 4-21Discovery of iSCSI Storage DevicesAn iSCSI device can have many portals. Each portal can have remote targetsassociated with it. In order for the V-Switch to recognize a portal’s remotetargets, you must define the IP Address of the iSCSI portal. Once defined, theV-Switch will automatically receive the list of remote targets attached to theportal.iscsi discovery rportal showThis command displays iSCSI remote portals.iscsi discovery rportal showiscsi discovery rportal setThis command allows you to set the interval (period) for the V-Switch to pollthe network for iSCSI targets.iscsi discovery rportal setSWITCH PARAMETER D EFINITION STATUS E XAMPLE-ip IP ADDRESS IP ADDRESS OFNETWORK PORTMANDATORY 212.199.43.70-port TCP PORT TCP PORT FORISCSICOMMUNICATIONOPTIONALDEFAULT :32605003-period PERIOD PERIOD FORREDISCOVER INSECONDSOPTIONALDEFAULT :1800Example:The V-Switch will poll the network for remote portals every 10 minutes.iscsi discover rportal set –ip 212.199.43.66 –period 600
