SaMASZ KDT 180 Operator's Manual

Also see for KDT 180: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

Contents

Operator’s manual Rear disc mowersKDT- 6 -1 23 45 67 891011 113-point linkage frame (1) enables attachment of the mower to tractor’s 3-point linkage. Drivefrom tractor’s rpm is transmitted through intersecting axis gear (3) on the cutterbar (4). On thecutterbar, there are disco with two knives each. Apart from that, drive from tractor’s rpm throughIntersecting axis gear (3) and PTO shaft (10) is transmitted to roller conditioner (8). Hydrauliccylinder (2) is used to adjust the mower to working position. It is supplied from outer hydraulics ofthe tractor. Main frame, on which the cutterbar is situated, is supported by the springs (7). Swathguides (5) are mounted on the main frame.Fig. 3c. Parts of SaMASZ rear disc mower with tine conditioner1 – 3-point linakge frame2 – Hydraulic cylinder with support springs3 – Intersecting axis gear4 – Cutterbar5 – Swath guides6 – Safety guard7 – Springs8 – Roller conditioner9 – Chain gear10 – PTO shaft11 – Support legs3.3. Standard equipment and spare partsThe mowers are sold with the following standard equipment: warranty card, operator’s manual with spare parts list, cutting knives: additional set, PTO shaft with overrunning clutch, spray paint (150 ml).Optional extra equipment: warning plate with combined lights and reflectors, warning triangle.Tab. 3. PTO shaft for rear disc mowerModel Power Lenght Torque Symbol Clutch ProducentKM ft. in NmKDT 180 21 3'-3' 12'' 270 7G2N086CE007096MAOverrunningrightBONDIOLI& PAVESSIKDT 220 ; KDT 260KDT 300 ; KDT 340KDT 341KDT 220 S/SL/WKDT 260 S/SL/W35 2'12-4'22'' 460 7G4N091CE007096MA