Saab R5 Operation & Installation Manual

Also see for R5 SUPREME AIS: Operation & installation manual Instruction Operation & installation manual Installation Short Instruction Installation Short Instruction

Contents

Saab R5 Operation & Installation Manual Manual pdf 25 page image

R5 SOLID AIS SystemINSTALLATION7000 118-200, C2 Page 25RELAY VCC Brown/RedRELAY GND White / PinkRELAY OUT Pink / BrownTable 11 – Alarm Relay WiresFigure 10 – Alarm Relay3.8 System ConfigurationWhen the physical and electrical installation of the system is complete, the R5 SOLIDneeds to be configured. The installer is required to set the parameters listed below. Fordetailed information about the configuration parameters and how to set them, refer tosection 4.2.1 and 4.4. MMSI number (Maritime Mobile Service Identity) IMO vessel number (should be set to zero for Inland vessels) Call Sign Ship Name Ship Type (Only when operating in Class A mode) Height Over Keel Ship dimensions and antenna positions. Refer to section 4.4.4 Main Menu Config Ship Dimensions for more information.If the R5 SOLID is operating in Inland mode, the following parameters also need to beconfigured: ENI, Unique European Ship Number ERI Ship Type (ERI code and standard AIS ship type will be set automatically bythe R5 SOLID when selecting an ERI Ship Type from list in Ship Static view. Quality setting for SOG, COG and HDG. Should be set to low if no type approvedsensor (e.g. a gyro or speed log) is connected to R5 SOLID.