Saab R5 Operation & Installation Manual
Also see for R5 SUPREME AIS: Operation & installation manualInstructionOperation & installation manualInstallation Short InstructionInstallation Short Instruction
                                                                                       | |
Contents
| 
R5 SOLID AIS SystemOPERATION7000 118-200, C2 Page 504.21 GPS StatusThis view displays the satellites received by the R5 SOLID internal GPS receiver. The listis sorted by the satellites ID (PRN number) and shows elevation, azimuth and signal tonoise ratio (SNR) for each satellite. The view also displays the total number of satellites inview and the total number of satellites used in the position calculation reported by GGAsentence.Figure 29 – GPS Status4.22 View Raw DataThis view displays the incoming data on the selected serial port. It is also possible topause the data on the screen by pressing the “Freeze” button. Use the ARROW KEYPADbuttons ∧ ∨ to navigate to the Freeze button and press ENTER. The View Raw Data viewcan be a helpful tool when trouble shooting the system to see what sensor input is actuallyreceived on each port. The view can be accessed from Main Menu Status View RawData.Figure 30 - View Raw Data4.23 SW/HW InfoThis view displays the software and hardware revisions for the R5 SOLID and is accessedfrom Main Menu Status SW/HW Info. NOTE: This information should always beprovided when in contact with Saab TransponderTech support.Figure 31 - SW/HW Info |
Related manuals for Saab R5 SUPREME AIS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine