R5 SUPREME AIS SystemINSTALLATION7000 118-300, A3 Page 11VHF Antenna BA1012 7000 000-077R5 SUPREME CDU Flush mount frame forR4 MKD upgrades7000 118-367Table 2 – Accessories (Optional)3.2 Equipment Installation EnvironmentThe table below lists the IEC 60945 equipment classification for the system.Name Part number IEC 60945installation categoryR5 SUPREME Transponder 7000 118-540 ProtectedR5 SUPREME CDU 7000 118-530 ProtectedR5 AIS Junction box 7000 118-120 ProtectedMA-700AT575-68VHF/GPS Antenna7000 000-4857000 000-1357000 000-435ExposedExposedExposedTable 3 - IEC 60945 equipment classification3.3 Installation CablesThe following cables are needed to install the R5 SUPREME AIS System.1. 2 x R5 Signal Cable DSUB-DSUBMarking: 7000 118-286Type: Shielded Twisted Pair x 0.33 mm2Length: 2 mDiameter: 11 mmConnector: 2 x 26-pole H.D.D-SUB (female to male)Flame retardant: IEC60332-1Interconnection: Straight connection on all pins.Note: Two signal cables are used from transponder to junction box, but one is installedreverse direction
