Saeco 10000241 Operating And Maintenance Manual

Saeco 10000241 Operating And Maintenance Manual Manual pdf 10 page image

74 51 367 8 92Insert the filter in its place withinthe empty tank (see figure);Press down until it clicks intoplace.Scroll to “filter” and pressagain.When the machine has finished, turn the knob until it is in the rest position ( ). Press a few times until the“exit” message is displayed. Then press . The machine is now ready for use. NOTE: if the Intenza water filteris not used, insert the small white filter previously removed (see step 1) into the water tank.Place a container beneath thesteam/hot water spout.Press .Select “maintenance” and press thebutton.Select “activate” and press thebutton. Turn the knob to the position.Water dispensing begins.3 maintenance3.1 filter 3.1.3 activateexecute nowRemove the small white filter fromthe water tank and store it in a dryplace sheltered from dust.INTENZA WATER FILTERTo improve the quality of the water you use, and to extend the life of your machine at the same time, it isrecommended that you install the water filter. After installation, select the water filter function under themaintenance menu (see page 20). By setting the water filter status to ON, the machine informs the user whenthe filter must be replaced.Remove the water filter from its packaging, immerse it vertically (with the opening facing upwards) incold water and gently press its sides so as to let the air bubbles out.Fill the water tank with freshdrinking water and re-insertit intothe machine.Set the Intenza Aroma System:A = Soft waterB = Medium water (standard)C = Hard water2.3.1.2.1.