Saeco HD8914 Instruction Manual

Also see for HD8914: Instruction manual Owner's manual Instruction manual Instruction manual Quick start guide

7ENGLISHHot water circuit rinsing phase> Follow the instructions in the “6.4.1 Hot water dispensing” chapter.> After having dispensed about a cup of water, stop dispensing hot water by pressing theOK button. Empty the container. The machine is ready for brewing.5.2.4 AquaClean water filter first installationInstalling the SAECO AquaClean water filter purifies the water your machine uses tobrew coffee for a greater coffee taste. Moreover by replacing the filter when indicatedby the machine you don’t need to descale for 5000 * products!> Refer to the “10.2 AquaClean water filter” chapter (*) for more information.5.3 AdjustmentsThe machine is supplied with standard brewing default settings. To enhance the quality andtaste of the coffee, it is recommended to adjust the settings. In particular, to obtain a strongertaste, set the brewing temperature, aroma and grinding fineness to the top of the scale.5.3.1 Water hardness measurement and settingTo preserve the taste of the coffee it is essential to measure the water hardness.> Dip the disposable strip in water for 1 second, to test the water hardness (stripsupplied with the machine).> Remove the disposable strip and wait for 1 minute.> Check how many squares change colour, then refer to the table.number of red squares value to be set water hardness1 1 very soft water2 2 soft water3 3 hard water4 4 very hard waterRefer to the “8.2 Changing the default settings” chapter to change the water hardnessdefault.5.3.2 Aroma intensity adjustment> Every time the AROMA STRENGTH button is pressed, the aroma of your coffeechanges by one degree. The display changes with the chosen aroma.extra light aromaThe machine will automatically dosethe right quantity of coffee.light aromamedium strength aromastrong aromaextra strong aromapre-ground coffee The right quantity of coffee will be dosedby using the supplied measuring scoop.5.3.3 Ceramic coffee grinder adjustmentAdjustments to the coffee grinder must be made exclusively when the machine isgrinding coffee beans.> Lift the coffee bean hopper lid.> Identify the grinder adjustment knob. Reference marks placed around the rotary knobshow the grinding settings. It is possible to set the machine to one of five different grindingfineness levels: for the leftmost position, for coarse grinding and a lighter taste (minimumsetting) to the rightmost one, for fine grinding and a stronger taste (maximum setting).> Place a small cup under the coffee dispensing spout.> Press the ESPRESSO button.> While the machine is grinding, press and rotate the knob by one unit at a time. Thetaste difference will be detectable after brewing 2-3 coffee cups.1 23 44321Incanto_AMF_EN-IT-DE_Rev01.indb 7 27/03/15 09:58