• 36 •Machine Installation - Service Provider ManualThe following illustration shows the required access distances:• to the keypad on the front of the appliance;• to the service units in the event of malfunction.After placing the packaged product near the installation site, pro-ceed as follows:• ensure that the packaging has not been tampered with dur-ing transport and that the original packaging is intact andclosed;• open the packaging;• check the condition and model of the machine;• check the content of the accessories bag enclosed with themachine (see "9.3 List of Accessories");• remove the machine from its original packaging;• remove any remaining packaging from the machine;• lift the machine and place it in the designated area.1 Insert the tube support into the fi rst slot as shown in thefi gure.2 Rotate the support 90° until it is properly positioned.9.5 Disposal of PackagingAfter opening the outer box, it is recommended that the packag-ing materials are separated according to type and disposed of inaccordance with the regulations in force in the country of use.We recommend keeping the outer box for futuretransfers or transportation.9.6 Filling the Water TankBefore turning on the machine, the water tank should be fi lledwith fresh drinking water.Warning! Before using the machine for the fi rsttime, wash the water tank carefully. Fill the watertank with fresh drinking water only. Hot or carbonatedwater, as well as other liquids, will damage the machine.Refer to section 3.1. to carry out the procedure correctly.