Saeco PROFIMAT Instructions For Installation And Use Manual

Contents

9Englishmachine off and check the problem. After having ensured that the water flow has been reestablished,turn the machine on. If the led is still illuminated, call your authorized dealer.• The led blinks when a failure in the water level control occurs. Call your authorized dealer.• Shortage of coffee:The led located above the symbol illuminates when the coffee bean hopper is empty. Refill it withcoffee beans and press the selection button corresponding to the desired product.If after having refilled the bean hopper the led is still on, check that the CLOSING knob is turned to“OPEN” (fig.9).• Coffee dreg drawer full:The led above the symbol blinks when the dreg drawer is full. If the drawer is not emptied after 8servings, the led illuminates and the machine stops working. Once the dreg drawer has been emptiedthe machine will start working again.Fig. 1215-CLEANINGANDMAINTENANCE• For proper operation the machine has to be cleaned everyday.• Coffee nozzle: Remove the nozzle by gently pulling ittowards the outside (fig.12) wash it in hot water and thenreinstall it.• Brew group: Remove the coffee nozzle, open the stainlesssteel door and remove the brew group rotating the releasemechanism to position 3 (fig.13). Clean the back panelwith a damp sponge. Wash the brew group in warmwater, dry it well, and reinstall it into the machine rotatingthe release mechanism to position 3. Pay attention that thereference arrows on the central shaft are well aligned(Align them by means of a special key when necessary). Ifthe brew group is well inserted, the release mechanismshould be in position 2.• Dreg drawer and drip tray: Empty the dreg drawer,remove the grill, wash it in warm water and dry it. Followthe same procedure for the drip tray.• General cleaning: Wipe with a damp cloth the entireexterior as well as the cup warmer surface and the steam/hot water nozzles.• Maintenance: It’s recommended to have routingmaintenence carried out by an authorized dealer .This willensure proper function of the machine and optimumresults. As for the cleaning schedule see warranty certifi-cate or follow schedule recommended at the time ofpurchase. Check the number of the cycles on the counterlocated under the upper pannel of the machine (fig.14)Fig. 14123456°CONFig. 13123

/ 9

Related manuals for Saeco PROFIMAT