Saeco Syntia Operating Instructions Manual

Also see for Syntia: Operating instructions Service manual Service manual Quick start guide

Contents

• 28 •• 28 •• The machine begins the dispensingphase. The “ ” icon will be displayedto show which button is being pro-grammed.• Press the button with the “ ” iconagain when the desired amount ofcoffee in the cup is reached.At this point the button “ “ is pro-grammed; each time it is pressed andreleased, the machine will brew thesame amount of coffee that was just pro-grammed.Stand-ByThe machine is designed for energy sav-ing. The machine automatically turns offafter 60 minutes of inactivity.Note: During the switchingoff phase, the machine per-forms a rinse cycle, if a coffee producthas been brewed.To turn the machine on again, simplypress the ON/OFF button (if the powerswitch is set to “I”). In this case the ma-chine will go through the rinse cycle onlyif the boiler is cold.COFFEE BREWINGNote: Should the machine notbrew coffee, make sure thatthe water tank contains water.Before brewing coffee, checkthe messages on the display.Check that the water tank and coffeebeen hopper are full.Leave the dial on the coffeeposition “ ” during the dis-pensing phase.Before brewing the coffee,adjust the height of the brew-ing head according to your needs, andselect the aroma or the pre-groundcoffee.GreenGreenbean hopper.Do not pour coffee beans when thecoffee grinder is working.The machine allows slight adjustments tothe coffee grinder to adapt it to the kindof coffee used.To make any adjustment, press and turnthe knob inside the coffee bean hopper.Press and turn the knob by one notch ata time and brew 2-3 cups of coffee; thisis the only way to notice differences ingrind.The reference marks inside the coffeebean hopper indicate the grind setting.There are 5 different grind settings tochoose from with the following refer-ences:Large Dot - Coarse GrindSmall Dot - Fine GrindGreenAdjusting the Coffee QuantityThe machine allows you to adjust theamount of brewed coffee according toyour tastes and/or the size of your cups.Each time you press and release button“ “ or “ “, the machine brews apre-programmed amount of coffee. Thisamount may be reprogrammed to yourtaste. Each button may be individuallyprogrammed for a specific brew setting.As an example, the following proceduredescribes the programming of the button“ “, which is normally associated withespresso coffee.• Place a cup under the dispensinghead.• Press and hold the “ “ button, untilthe relevant icon is displayed. At thispoint, the machine is programming it.Black