Saeco Syntia Operating Instructions Manual

Also see for Syntia: Operating instructions Service manual Service manual Quick start guide

Contents

• 34 •• 34 •DESCALINGLimescale build-up is normal with the useof this appliance.The display informs you when descalingis necessary:Important Note: It is recom-mended to refer to the nextsection, “Remarks on Descaling”, forsome tips about keeping the machinein perfect working order.Orange• Press button “ ” to confirm theactivation of the descaling cycle.From this point forward,the descaling cycle must becompleted before proceeding.Warning! Remove the Intenzafilter before adding the des-caling solution.• Turn the machine on by pressing theON/OFF button. Wait for the machineto finish its rinse cycle and warmup.Please use Saeco descalingsolution in your machine. Ithas been specifically developed topreserve performance and function-ality throughout the lifetime of themachine and to ensure, with regularuse, a high quality delivered product.Warning! Never use vinegar asa descaling solution.Before descaling, remove the Pannarelloattachment from the steam/hot waterwand as described in the “Cleaning andMaintenance” section.• Hold the “ “ button for 5 seconds.The display will show the icon on theside.If you press the “ “ buttonby mistake, use the “ “button to quit.• Mix the descaling solution with wateras specified on the package of the des-caling product and fill the water tank.Place the tank back in the machine.• Insert a container below the steam/hotwater wand.Use a large container for thisprocess. If you do not have acontainer of this capacity, once it isfilled close the knob, empty the con-tainer and then place it again underthe wand and repeat the procedure.• After adding the descaling solutionin the tank, turn the selector dialclockwise to position “ ” to start thedescaling cycle.• The machine will start dispensing, atregular intervals, the descaling solution(the bar shows the cycle progress).RedRedRed