SYNTIA 07 DISASSEMBLYSaeco International Group Rev.01 February 2010 Page / 097.11. Grinder adjustment/assembly and disassembly1) To remove the upper grinder support, using ahex key push down and turn clockwise to releasethe grinder support from the bayonet coupling2) To remove the grinder blade from the uppersupport, turn it anti-clockwise until it detachesfrom the bayonet coupling3) To remove the lower grinder blade, keep theincrement pin (A) locked in position and turn thegrinder blade anti-clockwise, until it detaches fromthe bayonet coupling4) When refitting the upper grinder support,make sure you reposition it so that the mark is asillustrated in the photo123A409