User Manual of DVR6100V-H Series DVR113Figure 9.26 Create Self-signed Certificate2) Enter the country, host name/IP, validity and other information.3) Click OK to save the settings.OPTION 2: Create the authorized certificate1) Click the Create button to create the certificate request.2) Download the certificate request and submit it to the trusted certificate authority for signature.3) After receiving the signed valid certificate, import the certificate to the device.3. The certificate information will be displayed after you successfully created and installed the certificate.Figure 9.27 Installed Certificate Property4. Check the checkbox to enable the HTTPS function.Note: The HTTPS Port should be set to the range of 1-65535.9.2.11 Configuring EmailPurpose:The system can be configured to send an Email notification to all designated users if an alarm event isdetected, a motion detection event is detected, etc.Before configuring the Email settings, the device must be connected to a local area network (LAN) thatmaintains an SMTP mail server. The network must also be connected to either an intranet or the Internetdepending on the location of the e-mail accounts to which you want to send notification.Steps:1. Enter the Network Settings interface.Menu > Configuration > Network2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the NetworkSettings menu.
