User Manual of DVR6100V-H Series DVR15313.5 Managing User AccountsPurpose:There is a default account in the device: Administrator. The Administrator user name is admin and the password is12345. The Administrator has the permission to add and delete user and configure user parameters.13.5.1 Adding a UserSteps:1. Enter the User Management interface.Menu > Configuration > UserFigure 13.4 User Management Interface2. Click the Add button to enter the Add User interface.Figure 13.5 Add User Menu3. Enter the information for new user, including User Name, Password, Level and User’s MAC Address.Level: Set the user level to Operator or Guest. Different user levels have different operating permission.• Operator: The Operator user level has permission of Local Log Search in Local Configuration,Remote Log Search and Two-way Audio in Remote Configuration and all operating permission inCamera Configuration.• Guest: The Guest user has permission of Local Log Search in Local Configuration, Remote LogSearch in Remote Configuration and only has the local/remote playback in the Camera Configuration.User’s MAC Address: The MAC address of the remote PC which logs onto the device. If it is configuredand enabled, it only allows the remote user with this MAC address to access the device.4. Click the OK button to save the settings and go back to the User Management interface. The added newuser will be displayed on the list, as shown in Figure 13.7.
