User Manual of DVR6100V-H Series DVR31Auto-switch./ Show/Hide ToolbarNote: The Add IP Camera item is provided by the HDVR models only.3.2.2Using an Auxiliary MonitorCertain features of the Live View are also available while in an Aux monitor. These features include:• Single Screen: Switch to the single full screen by choosing channel number from the dropdown list.• Multi-screen: Adjust the screen layout by choosing from the dropdown list.• Previous Screen: Switch to the previous screen.• Next Screen: Switch to the next screen.• Quick Set: Set the video output mode to Standard, Bright, Gentle or Vivid.• Menu Output Mode: Select the menu output mode to HDMI/VGA, Main CVBS or Auto.• Main Monitor: Switch to the Main Output mode and the operation for the auxiliary output is disabled.Note: In the live view mode of the main output monitor, the menu operation is not available while Aux outputmode is enabled.3.2.3Main/Aux Output SwitchingWhen the HDMI/VGA output is configured as the main output, you can perform the following operation toswitch to CVBS output as the main output.Steps:1. Use the mouse wheel to double-click on the HDMI/VGA output screen, and the following message boxpops up:Figure 3.2 Switch Main and Aux Output2. Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel tocancel the operation.3. On the aux output monitor, you can do some basic operation on the live view mode for the Aux output,including recording, live view, image settings, switch to main monitor, and no operation is allowed forthe main output.4. To switch to the main vide output, select the Main Monitor from the right-click menu or use the mousewheel to double-click on the screen and then click Yes on the pop-up message box.Note: You can select the Menu Output Mode under Menu>Configuration>More Settings to Auto orHDMI/VGA and then restart the device to switch the main output back to HDMI/VGA output.
