Salus EP110 Installation Manual

Also see for EP110: Installer Manual and Quick Guide

Contents

MODE +HrSELECT SET<<MODE +HrSELECT SET<<FunctionsTemporary OverrideADV OverrideADV only works in AUTO or ONCE mode. During ADV, press MODE once to cancel ADV and go back to AUTO/ONCE mode after LCD backlight is turned off. +1Hr override and ADV cannot co-exist in same channel.During ADV mode, when +1Hr is pressed, override mode will cancel ADV mode then change to Boost mode.If +1Hr override (Boost) is running, then ADV is selected, ADV will be activated and the previous +1Hr overridewill be cancelled.Boost Override (+1Hr override)Boost Override (+1Hr override) is available in ONCE/AUTO/OFF modes. Boost mode can be activated even inADV mode. When boost mode is activated, ADV is canceled. Press +1Hr at current mode to activate the BoostOverride (+1Hr override) setting mode. Boost mode increases the time of the active program by 1-9 hours.The new setting hour “+x” (x=last boost hour+1 hour) is displayed. Subsequent press of +1Hr will increasethe duration by 1 hour. Maximum duration is 9 hours. If the number rolls back to blank, this will disable theBoost Override.MODE +HrSELECT SET<<Press +1Hr to enterBoost override.MODE +HrSELECT SET<<The number of boost hourswill be displayed.MODE +HrSELECT SET<<To exit boost override, pressmode button until number+x dissapears.Long press Mode while inAuto or Once to enter ADVoverride ModeShort press Mode while in ADV toexit mode back to auto or Once3 sec 1 sec14 EP110 Installation Manual