Salus EP110 Installation Manual

Also see for EP110: Installer Manual and Quick Guide

Contents

Fix the backplate to the wall. Align the front housingat the top edge.Fit the front housing. Press lightly.Wall mountingJumper settingsEP110 Switching BridgesSwitch Feature Setting DefaultProgram 5-2 days program or24h program 5-2 24H 5-2 days programMemory Backup Disable/enable theinternal backupbatteryOFF ON Internal backupbattery disabledNote: Changes to the jumper settings should only be made by the engineer carrying out the installationor another qualified person. The installer should select the jumper positions required if changes need tobe made to the factory default settings. These jumpers are found on the rear of the controller.The jumpers are found on the rear of your controller and can be usedto change the settings for the program type or internal backup memorybattery. If you want to change the position of your jumpers, please notethat you will need to reset your device. The default position for the jumpersset a 5+2 program type and keep the internal backup battery off.06 EP110 Installation Manual