Salus RT510RF Full User Manual

Also see for RT510RF: Installation manual Quick guide QuickGuide Installation QuickGuide Installation Installation manual

14TEST / PAIRINGSELECT SETTEST / PAIRINGSELECT SETTEST / PAIRINGSELECT SETTEST / PAIRINGSELECT SET6.1 Manual mode - changing temperature setpoint6. Operating modesIn manual mode, the thermostat maintains a constant temperature set by the user. To set temperature setpoint follow steps below:1 243PressTEST / PAIRINGSELECT SETbutton to activate theManual Mode.UsingTEST / PAIRINGSELECT SETorTEST / PAIRINGSELECT SETbuttons set newsetpoint temperature.After new setpoint temperature set,thermostat will return to the mainscreen and will work in manual mode.Hand icon will appear on the mainscreen.RT510TX thermostat offers few operating modes:- Manual mode - temperature setpoint is set by user manually and it’s maintained until user change the setpoint again or switch to another mode.- Schedule mode - thermostat works according to set schedule by user. It can be programmed in 5+2 (MON to FRI and weekend separately) mode ordaily (every day of the week separately) mode.- Temporary override mode - thermostat temporary overwrite programmed schedule and maintain the temperature until next program change (youcan use it only during active schedule mode).- Boost mode (hourly temperature override mode) - this option override the temperature setpoint for selected hours. It is available for manual andschedule mode.- Frost protection mode - thermostat maintain constant frost protection temperature until user exit this mode. Thermostat work on the lowest leveland takes as little energy as possible.- Sleep mode - thermostat is basically switched off and takes no energy. You can turn it on by any button.- Holiday mode - user can program day period to make thermostat maintain frost protection temperature. It is mostly when user go somewhere outsidefor a long time eg. holidays and doesn’t want thermostat to take bigger amount of energy.To turn off the Manual Mode pressTEST / PAIRINGSELECT SETbutton. Once the manual mode is off, the hand iconTEST / PAIRINGSELECT SETon the thermostat will disappear.