Salus RT510RF Full User Manual

Also see for RT510RF: Installation manual Quick guide QuickGuide Installation QuickGuide Installation Installation manual

22TEST / PAIRINGSELECT SET TEST / PAIRINGSELECT SETTEST / PAIRINGSELECT SET1 sec1 sec9. Test the pairing processPress TEST / PAIRING button to checkthe connection with the receiver.Antenna icon will display. Test modecan take up to 9 minutes.Press TEST / PAIRING button againto return to the main screen.The red LED and the green LED on thereceiver will begin to flash.Receiver will go back to normal workmode.It is important to place the receiver and transmitter in places where nothing interferes with the radio signal. The range of communication between thetransmitter and the receiver in an open area is up to 60m. The radio transmission is influenced by many factors that can shorten the working distance, suchas thick walls, drywall covered with aluminum foil, metal objects such as cabinets, general radio interference, etc. However, the range is sufficient for mostdomestic use. It is recommended to test the radio transmission between devices before mounting the regulator on the wall. The test can be performed bychanging the set temperature, i.e. by activating or deactivating the heating.1 2 34 5If you purchased an RXRT510 or RT510TX and intend pairing with other devices in the 5x5 range, please refer to the Receiver Units manual or therelevant manuals available at www.salus-controls.eu