English - 24When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.Temporary image retention may occur when viewing a static image on the set for more than two hours.After selecting “Zoom1”, “Zoom2” or “Wide Fit”:Press the ◄ or ► button to select “Position”, then press the ENTERbutton. Press the ▲ or ▼ button to move the picture up and down.Reset: Press the ◄ or ► button to select “Reset”, then press the ENTERbutton. You can initialize the setting.After selecting “Just Scan” in HDMI (1080i/1080p) or Component(1080i/1080p) mode:Press the ◄ or ► button to select “Position”, then press the ENTERbutton. Press the ▲, ▼, ◄ or ► button to move the picture.Reset: Press the ◄ or ► button to select “Reset”, then press the ENTERbutton. You can initialize the setting.HD (High Deinition)16:9 - 1080i/1080p (1920x1080), 720p (1280x720)Settings can be adjusted and stored for each external device you have connected to an input of the TV.Input Source Picture SizeATV, Video, S-Video, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P) 16:9, 4:3, Wide Fit, Just ScanPC 16:9, 4:3Alternately, you can press the P.SIZE button on the remote control repeatedlyto change the picture size.16:9 Zoom1 U Move Zoom2 U Move16:9Sets the picture to 16:9 wide mode.Zoom1Magniies the size of the picture onthe screen.Zoom2Magniies the size of the picture morethan “Zoom1”.Wide Fit U Move 4:3 Just ScanWide FitEnlarges the aspect ratio of thepicture to it the entire screen.4:3Sets the picture to 4:3 normal mode.Just ScanUse the function to see the fullimage without any cutoff when HDMI(720p/1080i/1080p), Component(1080i/1080p) or DTV (1080i) signalsare input.➣➣➣➣➣➣OSize16:9Zoom1Zoom2Wide Fit4:3Just ScanReturnEnterAdjustResetPositionSize16:9Zoom1Zoom2Wide Fit4:3Just ScanReturnEnterResetPositionAdjust
