English - 69Viewing a photo1. Press the W.LINK button on the remote control to display the “WISELINK”menu.2. Press the ◄ or ► button to move to “Photo”, then press the ENTERbutton.Photo iles are displayed.3. Press the ◄ or ► button to select the desired photo in the Photo list.Then Press the Yellow button to select only one ile.4. Press the ENTER button over a photo icon.The currently selected photo is displayed in full screen.Using the option menu during a slide show (or Viewing a Photo)1. During a slide show(or viewing a photo), Press the TOOLS button to set the option.2. Press the ▲ or ▼ button to select the desired option. Then press the ENTER button.Start Slide Show (or Stop Slide Show)You can start or stop a Slide Show.Press the ▲ or ▼ button to select “Start Slide Show” (or “Stop Slide Show”),then press the ENTER button.RotateYou can rotate images in full screen mode.Press the ▲ or ▼ button to select “Rotate”, then press the ENTER button.Press the ◄ or ► button repeatedly to rotate the photo by the desired amount.Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚.If you have select “Zoom”, the “Rotate” function is deactivateThe rotated ile is not saved.The Rotating function information icon is displayed at the top right of thescreenIcon Current OSD Function0˚ Rotating (0°) This rotates a photo to its originalposition90˚ Rotating (90°) This rotates a photo by 90 degrees180˚ Rotating (180°) This rotates a photo by 180 degrees270˚ Rotating (270°) This rotates a photo by 270 degrees➣➣➣➣➣➣➣SUM E Slide Show Previous Next TOOLS Option Return20/22 image_1.jpg 440x440 2.0KB 2008/1/1TOOLSStop Slide ShowRotateZoomSlide Show Speed : NormalBackground Music : OffBackground Music SettingPicture Mode : StandardSound Mode : CustomInformationEnterMove Return90˚Rotate
