English - Analogue Channel3. Press the ▲ or ▼ button to select “Analogue Channel”, then press theENTER button.If a channel is locked using the “Child Lock” function, the PIN inputwindow appears (refer to page 22).4. Press the ◄ or ► button to select the required item below.Press the ▲ or ▼ button to adjust to the setting satisfied.5. Press the EXIT button to exit.Programme (Programme number to be assigned to a channel)Press the ▲ or ▼ button until you find the correct number.You can also select the channel number directly by pressing the numericbuttons (0~9).Colour System: Auto/PAL/SECAM/NTSC.Press the ▲ or ▼ button to select the required colour standard.Sound System: BG/DK/I/LPress the ▲ or ▼ button to select the required sound standard.Channel (When you know the number of the channel to be stored)Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).Press the ► button, then press the ▲ or ▼ button to select the requirednumber.You can also select the channel number directly by pressing the numericbuttons (0~9).If there is abnormal sound or no sound, reselect the sound standardrequired.Search (When you do not know the channel numbers)Press the ▲ or ▼ button to start the search.The tuner scans the frequency range until the first channel or the channelthat you selected is received on the screen.Store (When you store the channel and associated programme number)Set to OK by pressing the ENTER button.Channel mode- P (Programme mode): When completing tuning, the broadcasting stationsin your area have been assigned to position numbers from P00 to P99. Youcan select a channel by entering the position number in this mode.- C (Air channel mode): You can select a channel by entering the assignednumber to each air broadcasting station in this mode.- S (Cable channel mode): You can select a channel by entering the assignednumber for each cable channel in this mode.➣➣➣➣➣ChannelAuto StoreManual Store ►Full GuideMini GuideDefault Guide : Mini GuideChannel ListChannel Mode : Added Ch.Child Lock : OnFine TuneDigital ChannelAnalogue ChannelManual Store1ProgrammeAutoColour SystemBGSound SystemMove Adjust ReturnC --Channel62 MHzSearch?Store
