Samsung 8 series User Manual

Also see for Galaxy 8: User manual User manual User manual User manual User manual

Contents

English - Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input onthe Home Theatre.When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from theHome Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect theDIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier orHome Theatre, not the TV.Connect only one Home Theatre.You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.Setting Up Anynet+Press the TOOLS button to display the Tools menu. You can also display Anynet+ menuby selecting Tools → Anynet+ (HDMI-CEC).SetupAnynet+ (HDMI-CEC) → Off / OnTo use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operationsare deactivated.Auto Turn Off → No / YesSetting an Anynet+ Device to turn Off automatically when the TV is Turned Off and setting a TVto turn off automatically when a HDMI-CEC device requestes tv to turn off.The active source on the TV remote must be set to TV to use the Anynet+ function.If you set Auto Turn Off to Yes, connected external devices are also turned off when theTV is turned off. If an external device is still recording, it may or may not turn off.Switching between Anynet+ Devices. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.Anynet+ devices connected to the TV are listed.If you cannot find a device you want, press the red button to scan for devices.. Press the ▲ or ▼ button to select a particular device and press the ENTERE button. Itis switched to the selected device.Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the DeviceList menu appears.Switching to the selected devices may take up to 2 minutes. You cannot cancel theoperation during the switching operation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected tothe TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure toswitch to an Anynet+ device by using the Device List.NNNNNN¦T❑NNN¦NNNNNNNNU Move E Enter R ReturnAnynet+ (HDMI-CEC) : On ▶SetupAuto Turn Off : YesMedia Play (USB & DLNA)Anynet+ (HDMI-CEC)Content LibraryInternet@TVHome Network CentreApplicationU Move E Enter R ReturnAnynet+ (HDMI-CEC) : OnSetupAuto Turn Off : Yes ▶U Move E Enter R ReturnView TVDevice ListRecording: DVDRDVDR MENUDVDR INFOReceiverSetup