Samsung AC JNCDEH Series Manual

Contents

12Drain hose installationCare must be taken when installing the drain hose from the indoor unit to ensure that any condensate water iscorrectly drained outside.The drain hose can be installed to the right of the base pan.1 Installing the drain hose should be the shorter, the better.ff In order to discharge condensate water, a downward gradient should be maintained.ff Fix the drain hose with Cable-Tie, so that it will not separate from the machine.2 Insulate and fix the drain hose according to the figure.ff Insert the drain hose to bottom of the outfall of water basin.ff Lock flexible hose clamp of the drain hose according to the figure.ff Wind and wrap flexible hose clamp and drain hose fully with thermal insulation sponge; fix both ends of external layerwith ribbon for thermal insulation.ff After being installed, drain hose must be insulated fully by heat insulating material. (To be provided at site.)A-A’Flexible hose clampof drain hoseJoint of drain hoseDrain hose Drain hoseFix with Cable-TieWrap thermal sleeve hoseIndoor unit• As shown in the figure,tighten the flexible hoseclamp of the drain hose.• After tightening theflexible hose clamp,attach the Insulation.Insulationwall×× ×hoseNo gradeNo slack No in the waterwater