17ENGLISHSetting an indoor unit address and installation optionff Set the indoor unit address and installation option with remote controller.Set the each option separately since you cannot set the ADDRESS setting and indoor unit installation setting option at the sametime.You need to set twice when setting indoor unit address and installation option.ff Please use the proper wireless remocon which can set 24 digit option code. Following is the instructions of setting option codewith wireless remocon of MR-EH00ff Please refer to the wired remocon installation manual for setting with the wired remocon.The procedure of setting optionMR-EH00ModeSelects operation mode.Air flow direction (Left and right)Adjusts the air flow direction left and right.PowerTurns the air conditioner on or off.TemperatureAdjusts the temperature.OptionsSelects options during operation.DirectionMoves to select and set an option.Fan speedAdjusts the fan speed.Air flow direction (Up and down)Adusts the air flow direction up and down (Notapplicable to Duct type models).SETSelects or cancels an option.SettingsSelects settings.TimerSets timer option.❈❈ Button shape and display may be different depending on the remote controller.