Samsung AH68-01850K Instruction Manual

GB62To tune in to a preset station, press on theremote control to select a channel.ï Refer to Step 2 on page 61 toautomatically or manually tune into a station.21 ï ìPRGMî flashes in the display.3Example: Presetting FM 89.1 in the memoryPress TUNING/CHto select "89.10".Press the TUNERbutton and select theFM band.ï Press the TUNER MEMORY button beforeëPRGMí disappears from the display.ï ëPRGMí disappears from the display andthe station is stored in memory.54ï You can select between 1 and15 presels.Press the TUNERMEMORY button.Press the TUNERMEMORY buttonagain. 6 To preset anotherstation, repeat steps2 to 5.Pressto select presetnumber.RADIO OPERATIONPresetting Stations6121 Tune in to thedesired station.Press the TUNERbutton and selectthe FM band.Automatic Tuning 2Manual Tuning21 Select a broadcaststation.Press the STOP ( )button to selectPRESET and then pressbutton to select the preset station.Automatic Tuning 1Press theFUNCTION button toselect the FM band.Press the STOP ( )button to select "MANUAL"and then press and holdbutton to automatically search the band.Automatic Tuning 2Press STOP ( ) to selectMANUAL and then brieflypress to tune in to a lower orhigher frequency.Manual Tuningï Each time the button is pressed, the sound switches between "STEREO" and "MONO".ï In a poor reception area, select MONO for a clear, interference-free broadcast.Press MO/ST button to listen in Mono/Stereo.(This applies only when listening to an FM station.)When is pressed, apreset broadcast station isselected.Press and hold TUNING/CH toautomatically search for activebroadcasting stations.Briefly press TUNING/CH toincrease or decrease thefrequency incrementally.Automatic Tuning 1Remote Control UnitMain UnitListening to Radioï This unit does not receiveAM broadcasts.NoteHT-Q20(41~70) -NOR-GB 3/20/06 9:38 AM Page 60