Samsung AJ TXJ KH Series Installation Manual

23EnglishInstallation ProcedureOption item Input unit SEG1 SEG2 SEG3 SEG4 FunctionSetting to Cool or Heat onlymode Main 0 00 0 Cooling and Heating (Factory default)0 1 Only Cooling0 2 Only HeatingPower improvement mode Main 0 10 0 Disabled (Factory default)0 1 EnabledMixed mode indoor input Main 0 20 0 Disabled (Factory default)0 1 EnabledAuto Change Over Main 0 30 0 Disabled0 1 Enabled (Factory default)Channel address Main 0 4A U Automatic setting (Factory default)00 ~ 15 Manual settingCAUTION• Edited option will not be saved if you do not end the option setting as explained in above instruction.࢘While you are setting the option, you may press and hold the K1 button to reset the value to previous setting.࢘If you want to restore the setting to factory default, press and hold the K4 button while you are in the option settingmode.– If you press and hold the K4 button, setting will be restored to factory default but it doesn't mean that restoredsetting is saved. Press and hold the K2 button. When the segments shows that tracking mode is in progress,setting will be saved.