Samsung AJ TXJ KH Series Installation Manual

8Installation ProcedureEnglishInstallation ProcedureStep 2 Checking and preparingaccessories and tools3-wirePower Cable (option)2-wireAssembly Cable (option)Drain Plug Energy LabelFederal law prohibits removal of this label before consumer purchase.U.S. GovernmentHeat PumpCooling and HeatingSplit SystemSamsung Electronics Co., Ltd.Model AJ036JCJ5CHHeating Capacity 40,000 Btu/hCooling Capacity 36,000 Btu/h13.5Most EfficientRange of Similar Models* Heating Seasonal Performance FactorLeast Efficient8.29.0-9.5HeatingEfficiency Rating (HSPF)*30.5Most EfficientRange of Similar Models* Seasonal Energy Efficiency RatioLeast Efficient14.016.5-18.5CoolingEfficiency Rating (SEER)*For energy cost info, visitproductinfo.energy.govThis system’sefficiency ratings dependon the coil your contractorinstalls with this unit. Theheating efficiency ratingvaries slightly in differentgeographic regions. Askyour contractor for details.Rubber Leg Installation ManualFlare Nuts, 15.88 mmouter pipe diameterFlare Nuts, 9.52 mmouter pipe diameterTube connector(Pipe 12.70 mm, Bolt 9.52 mm)Tube connector(Pipe 12.70 mm, Bolt 15.88 mm)NOTE• Attach Energy Label to the outdoor unit properly wheninstalling.• Wire assembly cables are optional. If they are notsupplied, use standard cables.• The drain plug and the rubber legs are included onlywhen the air conditioner is supplied without assemblypipes.• If these accessories are supplied, they are in theaccessory package or outdoor unit package.Step 3 Fixing the outdoor unit inplaceInstall the outdoor unit on a rigid and stable base toprevent disturbance from any noise caused by vibration.When installing the unit on tall stands or in a locationexposed to strong winds, fix the unit securely to theground or structure.1 Position the outdoor unit so that the air flow is directedtowards the outside, as indicated by the arrows on thetop of the unit.2 Attach the outdoor unit to the appropriate supportusing anchor bolts.• The ground wire for the telephone line cannot beused to ground the air conditioner.3 DIf the outdoor unit is exposed to strong winds, installshield plates around the outdoor unit, so that the fancan operate correctly.NOTE• Install provided rubber legs to prevent vibration andnoise.620 mmRubber leg360 mmCAUTION• Install a drain outlet at the lowest end around the basefor outdoor unit drainage• When installing the outdoor unit on the roof,waterproof the unit and check the ceiling strength.