Samsung AM007FNTDCH Installation Manual

Contents

30AHow to connect your extended power cables1. Prepare a compressor and the following tools.Tools Crimping pliers Connection sleeve (mm) Insulation tape Contraction tube (mm)Spec MH-14 20xØ6.5(HxOD) Width 19mm 70xØ8.0(LxOD)Shape2. As shown in the figure, peel off the shields from the rubber or wire of thepower cable.- Peel off 20 mm of the wire shields of the tube installed already.t After peeling off the tube wire, you must insert a contraction tube.t For information about the power cable specifications for indoor andoutdoor units, refer to the installation manual.CAUTION(Unit: mm)Power cableWire tube power cable3. Insert both sides of core wire of the power cable into the connection sleeve.f Method 1Push the core wire into the sleeve from both sides.Connection sleevef Method 2Twist the wire cores together and push it into the sleeve.Connection sleeve4. Using a compressor, compress the two points and flip it over and compress another two points in the same location.- The compression dimension should be 8.0.- After compressing it, pull both sides of the wire to make sure it is firmly pressed.Compressiondimensionf Method 1Compress it 4 times.5 mmf Method 2Compress it 4 times.5 mmConnecting power and communication cable

/ 33

Related manuals for Samsung AM007FNTDCH