Setting the On/Off timerYou can set the air conditioner to be turned on or off automatically at desired time.Setting the On timerWhen the air conditioner is turned off.Remote controller display1. Press the Timer button to select (On).- (On) indicator will keep blinking and you can set the time.2. Press the < or > button to set the time.- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~3 hours and hour unit from 3 ~ 24 hours.- Time can be set from minimum 30 minutes to maximum 24 hours.3. Press the SET button to complete the On timer setting.- (On) indicator and the set time of the timer will be displayed on the remotecontroller display.- On timer setting will be cancelled if you don't press the SET button within10 seconds after setting the time. Therefore, check for the (On) indicator on theremote controller display.Cancel f Press the Timer button select (On) press the < or > button set the timer to press the SET button.Additional options available in On timerSelect the mode from (Auto) (Cool) (Dry) (Fan) and (Heat).❋❇ Heat mode operates with MR-EH00/MR-EH00U model only.You can adjust the temperature after timer setting is completed.Temperature adjustment is only available in Auto/Cool/Dry/Heat mode. In Fan mode, temperature cannot beadjusted.❋❇ Heat mode operates with MR-EH00/MR-EH00U model only.• When On timer setting is completed, the set status will be displayed for 3 seconds, and then only (On) indicatorwill remain on the remote controller display thereafter.NOTEEnglish-18