English-47INSTALLATION07(*1) Height difference : The difference of the height between the corresponding indoor uint and the indoor unit installed at the lowest place.For example, When the indoor unit is installed 40m higher than the indoor unit installed at the lowest place, select theoption "1".(*2) Distance : The difference between the pipe length of the indoor unit istalled at farthest place from an outdoor unit and the pipe length of thecorresponding indoor unit from an outdoor unit.For example, when the farthest pipe length is 100 m(328 ft) and the corresponding indoor unit is 40 m away from an outdoor unit,select the option "2".(100 - 40 = 60m)(*3) Heater operation when the SEG9 of 02 series installation option is set to using hot water heater or when SEG15 is set to using external heatere.g. 1) Setting 02 series SEG9 =”1” / Setting 05 series SEG18 = “0”: Hot water heater is turned on at the same time as the heating thermostatis on, and turned off when the heating thermostat is off.e.g. 2) Setting 02 series SEG15 =”2” / Setting 05 series SEG18 =”A”:Room temp. ≤ set temp. + f(heating compensation temp.)- External heater is turned on when the temperature is maintained as 4.5 °C for 10 minutes.Room temp. > set temp. + f(heating compensation temp.)- External heater is turned off when the temperature is maintained as 4.5 °C + 1 °C (1 °C is the Hysteresis for On/Off selection.)Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18(*3)Explanation Control variables when using hot water / external heaterRemoteControllerDisplay OffDryIndicationand DetailsIndication DetailsSet temp. for heater On/Off Delay time for heater On20 At the same time as thermo on No delay1 At the same time as thermo on 10 minutes2 At the same time as thermo on 20 minutes3 1.5 °C No delay4 1.5 °C 10 minutes5 1.5 °C 20 minutes6 3.0 °C No delay7 3.0 °C 10 minutes8 3.0 °C 20 minutes9 4.5 °C No delayA 4.5 °C 10 minutesB 4.5 °C 20 minutesC 6.0 °C No delayD 6.0 °C 10 minutesE 6.0 °C 20 minutes