Samsung AQV09NS* Series User Manual

Also see for AQV09F** Series: Manual User manual User manual User manual User manual

Contents

E-15Selecting Heat ModeYou can select Heat mode if you want to heat your room.You can adjust the temperature and the fan speed when heating.1 Press the (On/Off) button.Result:  The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.2 Press the button on the remote control until is displayed.Result:  The indoor unit beeps each time you press the button. The air conditioner runs in Heat mode.Note You can change modes at any time.3 Press the button to adjust the temperature until the requiredtemperature is displayed.You can set the temperature between 16°C and 30°C.Result:  Each time you press the button:- The temperature adjusts by 1°C- The indoor unit beeps If the room temperature reaches 5°C higher than the settemperature, the air conditioner stops heating, but the fancontinues to operate. If the room temperature reaches 3°C lower than the settemperature, the air conditioner starts heating again.4 Press the button to select the fan speed until the required setting isdisplayed.Automatic (rotated :   )LowMediumHighSilence modeResult:  Each time you press the button, the indoor unit beeps. For the first 3~5 minutes, the fan may not operate to preventcool air from flowing out of the indoor unit.This helps to warm the air in your room sufficiently.Note Silence mode( ) makes the noise quieter duringoperating the indoor unit in the Heat mode.5 To control the airflow direction, refer to page 21.ENGLISHFORTE_Inv_31717A_IB_E.indd 15 2010-1-28 11:38:10