E-18Selecting Modemode helps users to fall asleep well after going to bed whetherbeing too hot to sleep or being awakened by coldness. The mode canbe selected only when the air conditioner is switched on in cool/heat mode.1 Press the (On/Off) button.Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.2 Press the button to select or mode.Result: The indoor unit beeps each time you press the button. The air conditioner runs in cool or heat mode.3 Press the button.- The remote control display shows you that this mode automatically stopsafter 8-hour operation.- In the case of adjusting time Press the button to adjust desired operation time from 30 minutesto 12 hours.mode will automatically stop after the set time. Press the button.Result: In the case of adjusting the extra time for mode,youshould press the button within 10 seconds.If you do not pressthe button within 10 seconds. mode willautomatically stop in 8-hour operation.4 Press the button to adjust the temperature until the desiredtemperature is displayed.You can set the temperature between 16°C and 30°C.Result: Each time you press the button;- The temperature adjusts by 1°C- The indoor unit beepsTTtaaTFORTE_Inv_31717A_IB_E.indd 18 2010-1-28 11:38:23