English-34Choosing the installation locationOutdoor Unit Where it is not exposed to strong wind Well ventilated and dustless places Where possible keep out of sunlight and rain Where neighbors are not annoyed by operation sound or hot air Solid wall or support that prevents vibration and is strong enough to hold the product weight Where there is no risk of flammable gas leakage When installing the unit at a high place be sure to fix the unit legs 3 m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated) Install the unit horizontally Place where drained water does not become any problem. Place with no plants (especially climbing plants) and where small animal can not access. Outdoor unit should not be place higher than 2.4 m or directly under eaves for accessibility for service and OH&S reasons.• Avoid the following places to prevent malfunction of the unit- Where there is machine oil - Salty environment such as seaside areas- Where sulfide gas exists - Other special atmosphere areas125 mm ormore300 mm or more125 mmor more600 mmminimum300 mmminimum300 mmminimum600 mmminimum'L' meters maximum total pipelengthWrap the refrigerant pipes and the drain hosewith the absorbent pad and vinyl tape. Refer topage 53 for further details.You can select the direction ofdraining (left or right).'H' meters maximum totalpipe height The appearance of the unit may be different from the diagram depending on the model.Model Pipe Length Pipe HeightMinimum Maximum Maximum09/12 3 15 818/24 3 30 1530 3 30 15Make at least one round: It will help reduce noise and vibration.'L' m as maximum pipe lengthand 3 m as minimum pipe length.(It will reduce noise and vibration)Australia_A3050_IB&IM_EN_03979A-03.indd 34 2013-10-26 16:55:11