Samsung ARFSWK** Series User & Installation Manual

Contents

English-57INSTALLATION05How to connect your extended power cablesItems to prepare(compressor and insulation tape should be prepared by an installation technician.)1. As shown in the figure, peel off the shields from the rubber/wireof the power cable.- Peel off 20 mm of the wire shields of the tube installed already.2. Insert both sides of core wire of the power cable into the connection sleeve.3. Using a compressor, compress the two points and flip it overand compress another two points in the same location.- The compression dimension should be 8.0.- After compressing it, pull both sides of the wire tomake sure it is firmly pressed.4. Wrap it with the insulation tape twice and position yourcontraction tube in the middle of the insulation tape.5. Apply heat to the contraction tube to contract it.6. After tube contraction work is completed, wrap it with theinsulation tape to finish.Tools Crimping pliers Connection sleeve (mm) Insulation tape Contraction tube (mm)Spec MH-14 20xØ7.0(HxOD) Width 18 mm 50xØ8.0(LxOD)Shape40 mmInsulation tapeContraction tube(Unit: mm)12060202020180Power cable (provided by us)20Wire tube power cableConnection sleeveComp. dim.Compress it 4 times5 mmInsulation tape• After peeling off the tube wire, you must insert a contraction tube.• In case of extending the electric wire, please DO NOT use a round-shaped pressing socket.- Incomplete wire connections can cause electric shock or a fire.Australia_A3050_IB&IM_EN_03979A-03.indd 57 2013-10-26 16:55:20