Samsung AR12HSFS Series User & Installation Manual

Contents

Samsung AR12HSFS Series User & Installation Manual Manual pdf 20 page image

Using the Auto Clean functionAuto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.Press the Auto Clean button.• During the auto clean function, indoor fan will continue to run and air flowblade will remain open to expel ambient air.When the air conditioner is turned off, The Auto clean indicator on the indoor unit display appears and the Auto clean functionruns.When the air conditioner is turned on, After stopping the air conditioner operation , the Auto clean indicator on the indoorunit display appears and the Auto clean function runs.Press the Auto clean button once again.Cancel※ Auto Clean time can vary, depending on the previously used mode.Auto(cool), Cool, Dry mode : approximately 30 minutes.Auto(heat (ARHP)), Heat (ARHP), Fan mode : approximately 15 minutes.Combining On Timer and Off TimerIf the air conditioner is on If the air conditioner is offPreset time on On timer is longer than Off timerEx) On timer : 3 hours, Off timer : 1 hour- The air conditioner will operate the Off timer after1 hour from the moment you have set the timer.Your air conditioner will turn on after 2 hours.Preset time on On timer is shorter than Off timerEx) On timer : 3 hours, Off timer : 5 hours- The air conditioner will operate On timer after 3 hoursfrom the moment you have set the timer.Your air conditioner will remain on for 2 hours and thenturn off automatically.• On timer and Off timer setting time should be different from each other.• Press the Cancel button on the remote controller while timer combination is on.Both of the On and Off timer will be canceled and the indicator will disappear.Setting the On/Off timerEnglish-20A3050 CB&XL&CH_IB&IM_DB68-04138A_HP&CO_EN.indd 20 2013-12-28 14:43:38