Samsung BN68-02712A-06 User Manual

Contents

20 EnglishBasic Features3DThis exciting new feature enables you to view3D content. In order to fully enjoy this feature,you must purchase a pair of Samsung 3DActive Glasses (SSG-2100AB, SSG-2200AR,SSG-2200KR) to view 3D video.Samsung 3D Active Glasses are soldseparately. For more detailed purchasinginformation, contact the retailer where you purchased this TV.✎ If there is any obstacle between the emitter and 3DActive Glasses, the proper 3D effect may not beobtained.■ 3D Mode: Select the 3D input format.✎ If you want to feel the 3D effect fully, please wearthe 3D Active Glasses first, and then select 3DMode from the list below that provides the best3d viewing experience.✎ When watching 3D images, turn on 3D ActiveGlasses.3D Mode OperationOff Turns the 3D function off.2D → 3D Changes a 2D image to 3D.Side by Side Displays two images next toeach other.Top & Bottom Displays one image aboveanother.Line by Line Displays the images for the leftand right eye alternately in rows.Vertical StripeDisplays the images for theleft and right eye alternately incolumns.CheckerBoardDisplays the images for theleft and right eye alternately inpixels.FrameSequentialDisplays the images for theleft and right eye alternately inframes.✎ “Side by Side” and “Top & Bottom” are availablewhen the resolution is 720p, 1080i and 1080p inDTV, HDMI and USB mode or when set to PCand the PC is connected through an HDMI/DVIcable.✎ “Vertical Strip”, “Line by Line” and “CheckerBoard” are available when the resolution is set toPC and the PC is connected through an HDMI/DVI cable.✎ “Frame Sequential” displays the frequency (60Hzonly) when the resolution is set to PC.■ 3D → 2D (Off / On): Displays the image for the left eyeonly.✎ This function is deactivated when 3D Mode set to“2D → 3D” or Off.■ 3D View point: The overall adjustment of 3Dperspective.✎ This function is deactivated when 3D Mode set to“2D → 3D” or Off.■ Depth: Adjusts focus / depth in “2D → 3D” mode.✎ This function is only activated when the 3D Modeis “2D → 3D”.■ Picture Correction: Adjusts the images for the left andright eye.■ 3D Auto View (Off / On): If 3D Auto View is set to On,a “Side-by-Side” format HDMI signal with one of theresolutions below is automatically switched to 3D. Here,correct 3D information must be sent from the StandardHDMI 3D Format.✎ If a 3D failure occurs due to a 3D information error,set 3D Auto View to Off and manually select a3D Mode using the 3D button or correspondingmenu.✎ Support resolution (16:9 only)Resolution Frequency (Hz)1280 x 720p 60 Hz1920 x 1080i 60 Hz1920 x 1080p 24 / 30 / 60 Hz■ 3D Optimize: The overall adjustment of 3D effect.3D emitter1_BN68-02712A-06Eng.indd 20 2010-09-03 오후 1:06:31