Samsung CLP-510/XBH Service Manual

Also see for CLP 510N - Color Laser Printer: Driver manual Manual Product guide Service manual Brochure & specs

Contents

8-22TroubleshootingSamsung ElectronicsService Manual8-22Chapter 8. TroubleshootingSamsung ElectronicsJam In Duplex Path Paper is caught while printing side 2.1. Open the Duplex Cover and then remove the paper.2. Remove any foreign objects in the Duplex Path.Jam In Exit Area Paper is caught in the Exit Area.1. Check the Exit Sensor actuator.--> Replace the Fuser if the Exit Sensor actuator is damaged or bent.2. Check that the Paper Guide Rib of the Output Guide is clean, and not damaged or distorted.--> Replace the Fuser or Exit Ass'y if it is not normal.3. Check the condition and operation of the Fuser Rollers.Jam Inside Printer Paper is caught inside printer1. Open the Duplex Cover and then remove the paper.2. Check the Feed sensor actuator.--> Replace the Feed Sensor if it is damaged or distorted.Load ManualPress Cont KeyThis is only displayed when printing in Manual Feed mode and theMPF tray is empty..Load a sheet of print material and press the On-Line/Continue button. You need to press the button for each page tobe printed.Load [Size] In [Tray] The size of paper in the tray and the size of paper required by the doc-ument being printed are different.*In this case the size of paper and tray is indicated.Load the correct size of paper.