4-3Samsung ElectronicsSummary of productService Manual1) OPC UnitImages are created on the OPC unit using an electro-photographic process. The unit consists of:-* OPC Drum* Waste Toner Ass'y used to collect waste toner remaining on the OPC drum,* Charge Roller Assy2) ITB UnitITB stands for Image Transfer Belt. An image developed on the OPC Drum is transferred first to theITB. This is called the T1 Transfer (Primary Image Transfer).Images are built up in layers on the ITB.First the Yellow (Y) colour image is created on the OPC and transferred to the ITBNext the Magenta (M) colour image is created on the OPC and transferred to the ITBFollowed by the Cyan (C) and Black (K) images.3) Transfer RollerOnce the complete, full colour, image, has been built up on the ITB the Transfer Roller is used totransfer the image onto paper. This is called the T2 Transfer (Secondary Image Transfer)4) FCT (First Cassette Tray)It stores and automatically feeds print paper.Pick-up Roller picks up paper, controls drive, feeds paper, removes static electricity, and so on.> Spec.* Paper arrange way : Side Registration* Paper Direction : FISO (Front-in, Side-Out)* Cassette Type : A4, Ltr* Paper Discharge : Separation Claw* Capacity : 250 Sheets (Standard paper 75mg/m? 20lb)* Paper Size : A4, Letter* Paper Weight (average) : 60~90g/m2 (16~24lbs)* Paper Type : General Printing Paper* Additional Function : Paper Empty Sensor5) SCT (Second Cassette Tray)This additionally stores and automatically feeds printing paper. Its function is the same as the FCT(First Cassette Tray)> Spec.* Paper arrangement : Side Registration* Paper Direction : FISO (Front-in, Side-Out)* Cassette Type : A4, Ltr* Paper Discharge : Separation Claw* Capacity : 500 Sheets (Standard paper 75mg/m2 20lb)* Paper Size : A4, Letter* Paper Weight (average) : 60~90g/m2 (16~24lbs)* Paper Type : General Printing Paper* Additional Function : Paper Empty Sensor