Samsung CLX-3185 User Manual

Also see for CLX-318 Series: User manual

Contents

Wireless network setup (CLX-3185FW/CLX-3185WK only)_ 7values for the machine. Before entering the IP address for themachine, you must know the computer’s network configurationinformation. If the computer is set to DHCP, you must contact thenetwork administrator to get the static IP address.Example)If computer’s network information is as below:-IP address: 169.254.133.42-Subnet Mask: 255.255.0.0Machine’s network information should be as below:-IP address: 169.254.133. 43 (Use computer’s IP address, withchanged last three digits.)-Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)-Gateway: 169.254.133.1 (Change the last three digits from IPaddress of your machine to 1.)17.The wireless network is connecting according to the networkconfiguration.18.When the wireless network setting is completed, disconnect the USBcable between the computer and machine. Click Next.19.The Installation process is being executed.20.The Fax Queue Creator window appears during the installationprocess.•For CLX-3185WK, click Cancel to go to the next step.•For CLX-3185FW, select your machine name from the PrinterName list and click Create. When the confirmation windowappears, click OK.21.Click Continue on the Read Me window.22.After the installation is finished, click Restart.Installing the machine on an Ad-Hoc wirelessnetwork (Macintosh)If you do not have a Access Point (AP), you may still connect the machinewirelessly to your computer by setting up an Ad-Hoc wireless network byfollowing these simple directions.Items to prepareEnsure you have next items ready.•Network-connected computer• Software CD that provided with your machine• The machine installed with a wireless network interface• USB cableCreating the Ad-Hoc network in MacintoshWhen the items are ready, follow below steps:1. Check whether the USB cable is connected to the machine.2.Turn on your computer and machine.3.Insert the supplied software CD into your CD-ROM drive.4.Double-click the CD-ROM icon that appears on your Macintoshdesktop.5.Double-click the MAC_Installer folder.6.Double-click the Installer OS X icon.7.Enter the password and click OK.8.The Samsung Installer window opens. Click Continue.9.Read the license agreement and click Continue.10.Click Agree to agree to the license agreement.11.Select Easy Install and click Install. Easy Install is recommendedfor most users. All components necessary for machine operationswill be installed.If you select Custom Install, you can choose individual operationswill be installed.12.When the message which warns that all applications will close onyour computer appears, click Continue.13.Select the Wireless Setting and Installation option and then clickOK.14.The software searches the wireless network.If the searching has failed, you may check if the USB cable isconnected between the computer and machine properly, andfollow the instruction on the window.15.After searching the wireless network, a list of wireless network yourmachine has searched appears.If you want to use the Samsung default ad-hoc setting, select the lastwireless network on the list, which Network Name(SSID) is portthruand Link Quality is Printer Self Network.Then, click Next.If you want to use other ad-hoc settings, select other wirelessnetwork from the list.If you cannot find out the network name you want to choose, orif you want to set the ad-hoc configuration manually, clickAdvanced Setting.•Enter the wireless Network Name: Type in the SSID nameyou want (SSID is case-sensitive).•Operation Mode: Select Ad-hoc.•Channel: Select the channel.•Authentication: Select an authentication type.Open System: Authentication is not used, and encryptionmay or may not be used, depending on the need for datasecurity.Shared Key: Authentication is used. A device that has aproper WEP key can access the network.•Encryption: Select the encryption. (None, WEP64, WEP128)•Network Key: Enter the encryption network key value.•Confirm Network Key: Confirm the encryption network keyvalue.•WEP Key Index: If you are using the WEP Encryption, selectthe appropriate WEP Key Index.The wireless network security window appears when thead-hoc network has security setting.The wireless network security window appears. Select OpenSystem or Shared Key for the authentication and click Next.•WEP (Wired Equivalent Privacy) is a security protocolpreventing unauthorized access to your wireless network.WEP encrypts the data portion of each packet exchangedon a wireless network using a 64-bit or 128-bit WEPencryption key.16.The window which shows the wireless network setting appears.Check the settings and click Next.Before entering the IP address for the machine, you must knowthe computer’s network configuration information. If thecomputer’s network configuration is set to DHCP, the wirelessnetwork setting should also be DHCP. Likewise, if thecomputer’s network configuration is set to Static, the wirelessnetwork setting should also be Static.If your computer is set to DHCP and you want to use Staticwireless network setting, you must contact the network