4.Servic4.3 Information4.3.1. General• Information > GeneralThis menu displays the machine’s serial number, asscall, and the day of first service.4.3.2. Supply Status• Information > General4.3.2.1. Customer Replacement Unit (• Information > Supply Status > Customer Repp (4.3.2.2. Field Replacement Unit (FRU)This menu displays the machine’s customer replacemto check the information of the selected unit.• Information > Supply Status > Field ReplaceThis menu displays the machine’s field replacementcheck the information of the selected unit.In the CRU and FRU list, there are four columns : ite• Item : Refer to the table below.• Status : This shows the current status of the selectStatus : This shows the current status of the select• OK : The current count is smaller than the d• Check : The current count is bigger than de• Off : The current count exceeds the max life• Count : This shows the current count of the selected• Max. life : This shows the max capacity of the selecUsers can edit the default warning value within the giSelecting some items will enable the reset button to rSelecting some items will enable the reset button to rUnit Item Max.TonerYellow 20K / 15Magenta 20K / 15Cyan 20K / 15Black 25KImaging UnitYellow 75KMagenta 75KCyan 75KService ManualCLX-9250/9350 seriesBlack 75K4-ce Modesigned IP address, printed impressions since last(CRU)placement Unit( ))ment unit status. Users can select one item in the listement Unitunit status. Users can select one item in the list toms, status, current, max life.ted item.ted item.default warning valueefault warning valuee.d item.cted item.iven threshold.reset the current count to 0 after replacing the unitreset the current count to 0 after replacing the unit.Life DefaultWarning Value Threshold5K 10% 5 ~ 30%5K 10% 5 ~ 30%5K 10% 5 ~ 30%10% 5 ~ 30%10% 5 ~ 30%10% 5 ~ 30%10% 5 ~ 30%SAMSUNG ELECTRONICS10% 5 ~ 30%-6
