Samsung CS29Z45 Owner's Instructions Manual

Also see for CS-29Z45: Owner's instructions Owner's instructions Owner's instructions Owner's instructions Owner's instructions

Contents

English - 3◆ Source ListYou can switch betweenviewing signal fromconnected equipment,such as a VCR, DVD, set-top box, and the TV source(broadcast or cable).➢You can change the required external source simplyby pressing the SOURCE button on the remotecontrol. It might take a short period of time forpictures to be switched. To return to the TV mode,press the SOURCE button on the remote control.Input - Source List (depending on the model)Viewing the Menus1 Press the MENU button.The main menu is displayed on the screen. Its left sidehas five icons: Input, Picture, Sound, Channel, andSetup.2 Press the ▲ or ▼ button to select one of the icons.Press the ENTER button to access the icon’s sub-menu.3 Press the ▲ or ▼ button to move to items in the menu.Press the ENTER button to enter items in the menu.4 Press the ▲/▼/◄/► button to change the selecteditems. Press the MENU button to return to the previousmenu.5 Press the EXIT button to exit from the menu.Setup - Plug & Play (depending on the model)When the television is initially powered on, several basiccustomer settings proceed automatically and subsequently.The following settings are available.1 If the television is in standbymode, press the POWERbutton on the remote control.The Start Plug & Play isdisplayed. To start Plug& Play, press the ENTERbutton. The Languagemenu is displayed.➢ The Language menuwill automatically appearafter several seconds,even if the ENTERbutton is not pressed.2 Select the appropriatedlanguage by pressing the▲ or ▼ button. Press theENTER button. The Checkantenna input. is displayed.➢ If any language is not selected, the language menuwill disappear about 30 seconds later.continued...You can scan for the frequency ranges available to you (andavailability depends on your country). Automatically allocatedprogramme numbers may not correspond to actual or desiredprogramme numbers. However you can sort numbersmanually and clear any channels you do not wish to watch.➢ To stop the search before it has finished, press theENTER button.When finished, the Sort menuis displayed. To sort the storedchannels into the desirednumerical order, refer to“Channel - Sort”. To exit withoutsorting, press the EXIT button.Channel - Auto Store3 To search the channels,press the ENTER button. Tostop the search, press theENTER button.When the channel searchinghas finished, the Clock Setmenu is displayed.4 Press the ◄ or ► button tomove to the hour or minute.Set the hour or minute bypressing the ▲ or ▼ button.5 When you have finished,press the MENU button.The Enjoy your watching.is displayed, and then thechannel which has beenstored will be activated.Re-setting the Plug & PlayMethod:MENU ➜ ▲/▼ (Setup) ➜ENTER ➜ ▲/▼ (Plug & Play)➜ ENTERThis operation allows you tochange the programme numbersof stored channels. Thisoperation may be necessaryafter using auto store.◆ From: Channel number tobe changed.◆ To: New channel number to be identified.◆ Store: Confirmation the exchange of channel numbers.Channel - SortPlug & PlayEnter SkipOKCheck antenna input.OKEnjoy your watching.Move EnterAdjust SkipPlug & PlayClock Set 1 2 : 0 0 amMove Enter ReturnTVPlug & Play Language : English Time Child Lock Blue Screen : On SetupAuto StoreP 1 102MHz7 %Enter SkipPlug & PlayStopPlug & PlayEnter SkipAuto StoreStartPlug & PlayEnter ExitOKStart Plug & Play.Plug & PlayMove Enter SkipLanguageEnglishIndonesiaMelayuTVAV1AV2ComponentMove Enter ReturnTV Source ListSearchEnter ReturnStopP 1 102MHz7 %From : P 1To : P--Store : ?Move Adjust ReturnSortTVAA68-04048J-Eng.indd 3 2009-12-07 �� 6:29:48