English - 6Pressing TOOLS button to enter Dual l-ll/controls theprocessing and output of the audio signal. When poweris switched on, the mode is automatically preset to either“Dual-I ” or “Stereo”, depending on the current transmission.Selecting the Sound Mode(depending on the model)➢ ◆ If the receiving conditions deteriorate, listening willbe easier if the mode is set to the Mono.◆ If the stereo signal is weak and an automaticswitching occurs, then switch to the Mono.◆ When receiving a mono sound in the AV mode,connect to the “AUDIO-L” input connector on thepanel (front or side). If the mono sound comes outonly from left speaker, press the DUAL I-II button.◆ NICAM StereoType of broadcastMono(Normal use)Dual-INICAMDual-IINICAMMono(Normal)↔ ↔Regular +NICAM MonoRegular broadcast(Standard audio)NICAM Dual-I/IIOn-screen indicationMonoNICAMMono(Normal)↔NICAM Stereo StereoNICAMMono(Normal)↔◆ A2 StereoType of broadcastMono(Normal)Bilingual or Dual-I/IIRegular broadcast(Standard audio)On-screen indicationDual-I ↔ Dual-IIStereo Stereo Mono(Forced mono)↔Use to quickly select frequentlyused functions.➢ You can press TOOLSbutton and check theSleep Timer/PictureMode/Sound Mode /DualI-II/Turbo Plus/Sound Adjust by </ > button.The detail information please refer to page2TOOLS (depending on the model)ToolsMove Adjust ExitSleep Timer ◄ Off ►Picture Mode ◄ Dynamic ►Sound Mode ◄ Standard ►Dual I-II ◄ Mono ►Turbo Plus ◄ Off ►Sound AdjustSound - (depending on the model)Mode / Adjust / Auto Volume / Turbo Plus Mode : Standard / Music /Movie / Speech / CustomYou can select the type ofspecial sound effect to beused when watching a givenbroadcast.➢ You can select theseoptions by pressingTOOLS button to enter Sound Mode. Adjust : Bass / Treble / BalanceThe television has several settings which allow you tocontrol the sound quality.➢ If you make any changes to these settings, the soundmode is automatically switched to Custom. Auto VolumeEach broadcasting station has its own signal conditions,and so it is not easy to adjust the volume every time thechannel is changed. This feature lets you automaticallyadjust the volume of the desired channel by lowering thesound output when the modulation signal is high or byraising the sound output when the modulation signal islow. Turbo PlusThis feature suitably emphasizes both higher and lowerbands of sound (and includes other effects). You can enjoymore magnificent and dynamic sound when watchingmusic, movie, or other channels.➢ You can select the options by pressing TOOLS buttonto enter Turbo Plus.Move Enter ExitSoundTVMode : Standard ►Adjust ►Auto Volume : Off ►Turbo Plus : Off ►AA68-04048J-Eng.indd 6 2009-12-07 �� 6:29:49