RECORDING37Selecting the Auto flashThe default is OFF.The self-timer LED lamp(red) will blink for 10 seconds after the SELF-TIMER button hasbeen pressed.- For the first seven seconds, the LED blinks at 1 second intervals.- For the final three seconds, the LED blinks quickly at 0.5 second intervals.The remaining time to take an image will be shown on the LCD monitor.INFORMATIONSelecting the flash modeThe flash activates only in the STILL IMAGE mode.1. Do not turn the LCD monitor off.2. Select the STILL IMAGE mode by rotating the modedial.3. Press the FLASH( )button until the desired FLASHmode indicator displays on the LCD monitor. Use thecorrect flash to suit the environment.The default of each mode is listed below.- STILL IMAGE mode : Auto flash- MOVIE CLIP mode : Flash off(fixed)4-function buttonFLASH( )/ DOWN( ) buttonWhen the menu is displayed on the LCD monitor,pressing the DOWN ( )button makes the menu cursormove down or changes the sub menu.When the menu is not displayed on the LCD monitor, theDOWN ( ) button operates as the FLASH button.
