Samsung DIGIMAX 300 User Manual

Also see for DIGIMAX 300: User manual

Contents

Samsung DIGIMAX 300 User Manual Manual pdf 43 page image

RECORDING43ExposureThis camera automatically adjusts the exposure according to the ambient lighting conditions.However, you can select the exposure value by using the [EXPOSURE] sub menu.In the STILL IMAGE mode, you can select the exposure value.If you increase the exposure value, the image will be brighter.If you decrease the exposure value, the image will be darker.Selecting the exposure value1. Rotate the mode dial to the STILL IMAGE modeand press the MENU button.2. Press the UP( )/ DOWN ( ) button and select[EXPOSURE].3. Press the SET( ) button and the sub menu will bedisplayed.4. Press the UP( )/ DOWN ( ) button and selectthe desired [EXPOSURE] sub menu.5. Press the SET( ) button and the sub menu will bedisplayed. The default is [0.0EV].6. Press the MENU button to cancel the menudisplay.STILL IMAGEIMAGE SIZEQUALITYWHITE BALANCE AUTOEXPOSURE 0.0EXIT:MENU CHANGE:STILL IMAGEEXPOSURE+0.0EXIT:MENU SET:Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps)This change to the exposure will remain until the camera is switched off. When the camerais turned on again, the exposure compensation setting returns to 0.0EV (discarding theexposure compensation).When you have selected a change in exposure value, the value is displayed on the LCD.Decreasing or increasing the exposure value may lead to images being under or overexposed (too dark or too bright). Review your images using the LCD monitor to check thatthey have been successful.If you change the exposure compensation value in the STILL IMAGE mode, the changedvalue is also applied to the MOVIE CLIP mode.NOTICE