ŝ9ŞConnecting to a Power SourceImportant information about battery usageƃ When the camera is not used, turn off the camera power.ƃ Please remove the battery if the camera will not be used for long periods.Battery can lose power over time and are prone to leaking if kept inside thecamera.ƃ Low temperatures (below 0˚C) can affect the performance of the batteryand you may experience reduced battery life.ƃ Batteries will usually recover at normal temperatures.ƃ During extended use of the camera, the camera body may become warm.This is perfectly normal.INFORMATIONInserting the memory cardƈ Insert the battery as shown- If the camera does not turn on after youhave inserted battery, please checkwhether the battery is inserted with thecorrect polarity (+ / -).- When the battery chamber cover is opened,do not press the battery chamber cover byforce. This may cause damage to thebattery chamber cover.BatterystatusBatteryindicatorThe battery isfully chargedLow battery capacity(Prepare to rechargeor use spare battery)Low battery capacity(Prepare to rechargeor use spare battery)Low battery capacity(Prepare to rechargeor use spare battery)ƈ There are 4 indicators for battery condition that are displayed on the LCDmonitor.ƈ Insert the memory card as shown.- Turn off the camera’s power beforeinserting the memory card.- Have the front of the memory card facingtoward the front of the camera (lens) andthe card pins toward the back of the camera(LCD monitor).- Do not insert the memory card the wrongway round. Doing so may damage thememory card slot.