ŝ8ŞConnecting to a Power SourceIdentification of featuresƈ Self-timer lampIcon Status DescriptionFor the 2 seconds, the lamp blinks quickly at 0.25-secondintervals before taking a pictureFor the first 8 seconds, the lamp blinks at 1 secondintervals.For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals.A picture will be taken after about 10 seconds and 2seconds later a second picture will be taken.BlinkingBlinkingBlinkingƈCamera Status Lampƈ Mode icon Refer to page 14~17 for more information about the camera modesetting.MODE AUTO PROGRAM MANUAL NIGHT PORTRAIT CHILDREN MOVIE PLAYIconLANDSCAPE CLOSE UP SUNSET DAWN BACKLIGHT FIREWORKS BEACH & SNOWIconMODE SCENEStatus DescriptionThe lamp turns on and off when the camera is ready totake a pictureThe lamp blinks while saving the image data and turnsoff when the camera is ready to take a pictureWhile voice memo recording The lamp blinksWhile voice recording The lamp blinksTransmitting Data with a PC The lamp turns on (LCD monitor turns off)When the printer is printing The lamp blinksThe lamp turns on (The camera focus on the subject)The lamp blinks (The camera doesn't focus on the subject)After taking a pictureWhen the AF activatesWhen the USB cable isinserted to a printer The lamp is offPower on ƃ We recommend using batteries for a digital camera (Within a year from the dateof manufacture). The batteries are listed below.- Non rechargeable batteries : 2 X AA Alkaline (High Capacity)- Rechargeable batteries (Optional) : SNB-2512 (Ni-MH)SBP-2524 (Ni-MH)Using the batteriesModel SBP-2524 SNB-2512Type Ni-MH Ni-MHCapacity 2,500mAh 2,500mAhVoltage 1.2V X 2 1.2V X 2Approximately 210 ~ 240Minutes(Use for cradle)Charging time Approximately 240 Minutes(Use for SBC-N1)ſ Included battery may vary depending on sales region.