ENGENGSetting Up the Audio Options11 With the unit in Stop mode, press the SETUPbutton.22 Use the UP/DOWN buttons to select AudioOptions. Then press the ENTER button.33 Use the UP/DOWN buttons to select the desireditem. Then press the LEFT/RIGHT buttons.Dolby Digital Out1. PCM :Converts to PCM(2CH) audio.Select PCM when using the AnalogAudio Outputs.2. Bitstream :Converts to Dolby Digital Bitstream (5.1CH).Select Bitstream when using the DigitalAudio Output.NNNN OOOO TTTT EEEE : Be sure to select the correct Digital Outputor no audio will be heard.DTS1. Off : Doesn’t output digital signal.2. On : Outputs DTS Bitstream via digital output only.Select DTS when connecting to a DTS Decoder.2X Scan Audio1. Off : Turns 2X audio off.Though 2X Scan Audio is ON in the SETUP MENU,no sound will be heard on discs which are recordedwith LPCM, DTS or MPEG-2 Audio.2. On : Turns 2X audio on.MPEG-2 Digital Out1. PCM :Converts to PCM(2CH) audio.Select PCM when using the AnalogAudio Outputs.2. Bitstream :Converts to MPEG-2 Digital Bitstream(5.1CH or 7.1CH).Select Bitstream when using the DigitalAudio Output.Dynamic Compression1. On : To select dynamic compression.2. Off : To select the standard range.Speaker (DVD-S428K only)NOTE• How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.• Manufactured under license from Dolby Laboratories.”Dolby” and the double-D symbol are trademarks of Dolby Laboratories.• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.Setting Up the Parental ControlThe Parental Control function works in conjunction with DVDs that have been assigned arating - which helps you control the types of DVDs that your family watches. There are upto 8 rating levels on a disc.11 With the unit in Stop mode, press SETUP button.The Setup Menu screen appears.22 Use UP/DOWN to select Parental. Press ENTER.The Parental Control screen appears.33 Use LEFT/RIGHT to select Yes if you want to usea password. Press ENTER. The Enter Passwordscreen appears.44 Enter your password. The Re-enter Passwordscreen appears to confirm the password. Enteryour password again. The Parental Controlscreen appears.55 About the Rating Level ;The Rating Level will work only when UsePassword is set to Yes. To unlock the player,use LEFT/RIGHT to select No. Use UP/DOWNto select Rating level. Press ENTER.- Use UP/DOWN to select the level(e.g. Level 6) and pressENTER. Discs that contain Level 7 will now not play.- To cancel the rating level, use LEFT/RIGHT to select Noin Use Password.66 About the Change Password ;- Use UP/DOWN to select Change Password. Press ENTER.The Change Password screen appears.- Enter your new password. Re-enter the new passwordagain.NOTE• How to make the SETUP MENU disappear or return to menu screen during set up;Press RETURN button.• If you have forgotten your password, see Forget Password in the Troubleshooting Guide.e.g Setting up in LEVEL6.46 47CHANGINGSETUP MENU00049E S128/XST Eng3 11/21/02 3:47 PM Page 46