ENGENG12 13Description-Rear PanelDescription-Rear PanelSETUPRear Panel1. DIGITAL AUDIO OUT JACKS• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.2. ANALOG AUDIO OUT JACKS• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.3. MIXED AUDIO OUT JACKS• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.4. VIDEO OUT JACKS• Use a video cable to connect to the Video input jack on your television.5. S-VIDEO OUT JACK• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher qualitypicture. The S-Video must be selected in the VIDEO OUT SELECT.6. COMPONENT VIDEO OUT JACKS• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Yvideo. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must beselected in the VIDEO OUT SELECT.7. VIDEO OUT SELECT SWITCH• Use the switch to set video out.• If Y, Pb or Pr is selected, S-Video will not work.• If S-Video is selected, Y, Pb or Pr will not work.1 2 4 5 6 7DVD-S328K* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.NOTE1 2 3 4 5 6 7DVD-S428K00049E S128/XST Eng2 11/21/02 3:45 PM Page 12